How To Quickly And Easily Fix Your Blurry Sony LED TV

I love my Sony LED TV. It's a great size, it has great features and it can be used as a computer monitor. But sometimes, the screen is blurry when you turn on your TV. If this happens to you too, then this quick fix will get your TV looking like new again in no time!

First Step: Unplug The TV

  • Unplug the power cord from the wall plug, and then unplug it from the back of your Sony LED TV.
  • If you have an HDMI cable plugged into a port on your computer or game console, remove it now as well so that it doesn't get in the way later when we're trying to fix our blurry screen problem.

Second Step: Clean The Back Of The TV With A Rag

The second step to cleaning the back of your TV is to use a rag or paper towels to clean it. You can also use other cleaning products, but I prefer using a rag because it’s easiest and most effective. Do not use anything abrasive on the back of your Sony LED TV, such as steel wool or any chemical cleaners like Windex™ that contain ammonia and other harsh chemicals.

Third Step: Wipe Down The Screen With A Microfiber Cloth

Third, use a microfiber cloth to wipe down the screen. Place the microfiber cloth in the freezer for at least 10 minutes before you begin cleaning. This will make it easier to get rid of any dust or debris that may have collected on your TV's surface since it was last cleaned.

Once your TV is cooled off, wipe around the perimeter of your screen with gentle strokes in one direction only—from center to edges, if possible. Don't use harsh chemicals or abrasive materials; doing so can damage your television display beyond repair!

Fourth Step: Blow Out Your Ports

The fourth and final step is to blow out your ports. To do this, you'll need a can of compressed air. Use caution when blowing into the ports—don't get any dust or debris in there! If possible, use an air compressor that's designed for electronics instead of household ones (because they can be very powerful).

Fifth Step: Reboot Your TV

If you've done all of these steps and your TV is still blurry, the problem may be with your internet connection. The next step is to unplug the device for a few minutes and then plug it back in again.

If this doesn't work, try restarting your router by double-clicking on its icon on your computer screen.

Sixth Step: Check Your Connection Cables To make Sure They Are Secure

To check if the connection cables are secure, turn on your TV and look at it from a few feet away. If you see any flickering or dark spots on the screen, then there's something wrong with one of these connections. The best way to fix this problem is by checking if all three HDMI ports work properly and that none of them have been damaged by heat or moisture (such as rain).

Conclusion

We hope that this guide has helped you understand the problem and get your TV working again. If the situation your condition is still the same then it’s time to call experts

Are looking for The Professional Sony LED TV repair service provider in Delhi/NCR. Then you can contact Malik Electronics. We are the best Sony led tv repair services in Delhi NCR.